HVAC Problems? Trusted Repair, Installation & Maintenance Across Fraser Valley

Rep-Air Heating and Cooling repairs, installs and maintains furnaces, air conditioners and heat pumps across the Fraser Valley. If your system stops heating, blows warm air or spikes your energy bill, book a licensed technician to find the cause.

HVAC AC Repair & Service

When your AC quits, blows hot air, or starts making new noises, you feel it fast, especially during a heatwave.

Most calls for AC repair in the Fraser Valley come down to a handful of issues: refrigerant loss, seized compressors, failed capacitors, and clogged drains. You might also notice water leaking inside, strange rattles, or a sharp jump in hydro bills. We see these failures more often after wildfire smoke or a stretch of high humidity.

What we check:

Refrigerant pressures and possible leaks
Condition of evaporator and condenser coils
Electrical continuity and capacitor function
Thermostat signals and control board errors
Airflow and filter blockages

We don’t shotgun parts, our techs get to the real failure point, so you’re not paying for guesswork. If your system is too far gone, we’ll walk you through the difference between another repair and full AC Installation & Replacement. Sometimes, a quick AC Maintenance & Tune-Up can catch issues before they become expensive.

For details on what to expect or to schedule fast help, see our HVAC AC Repair & Service overview.

HVAC AC Installation & Replacement

Old AC barely limping along, or are you finally ready to ditch the window shakers for central air? This is where we step in.

Fraser Valley homes often have aging R22 systems or units that just can’t keep up anymore, especially when dust, humidity, or a power surge hits. Typical warning signs include uneven cooling between rooms, frequent breakdowns, or energy bills that don’t match your usage.

Installation process highlights:

Load calculation based on home size, insulation, sun exposure
Ductwork assessment for leaks or restrictions
Removal and environmental handling of old refrigerants
System commissioning and walkthrough on controls, filter access, and thermostat

We get a lot of calls from frustrated owners who’ve already spent too much on repeated HVAC AC Repair & Service. The jump to a new system can mean lower bills, fewer headaches, and comfort that actually matches the thermostat. Regular AC Maintenance & Tune-Up after installation keeps your warranty intact.

Explore our complete HVAC AC Installation & Replacement coverage to see how we approach planned upgrades.

HVAC AC Maintenance & Tune-Up

Don’t let your AC quit in the middle of a hot spell, regular tune-ups keep the headaches (and bills) away.

We’re called in for ACs short-cycling, blowing weak air, or giving off musty smells. In most cases, it’s a dirty coil, slow refrigerant leak, or a filter so clogged it’s choking airflow. The Fraser Valley’s humid climate and wildfire smoke only make these problems show up sooner.

What’s included in a real tune-up:

Coil cleaning and straightening
Electrical safety checks and capacitor testing
Refrigerant charge measurement
Drain line clearing and inspection
Airflow and temperature differential checks

This isn’t just a filter swap. We catch issues early, before they turn into a call for HVAC AC Repair & Service or worse, a full replacement. Pair this with annual Furnace Maintenance & Tune-Up for all-season coverage.

Lock in proactive care with our HVAC AC Maintenance & Tune-Up program.

HVAC Furnace Repair & Service

Nothing makes a bad morning worse than a silent furnace and a freezing house.

We see all the classic failures: pilot lights failing to stay lit, burners clicking but never firing, rattling blower motors, and sudden shutdowns mid-heat. Most of the time, it comes down to cracked heat exchangers, failed ignitors, or dirty flame sensors, especially after a rainy stretch or power surge.

Common furnace trouble signs:

Cold air from the vents when heat is on
Furnace cycling on and off rapidly
Odd smells, especially burning or musty odors
No response from the thermostat

We always start with a full diagnostic, thermostat, control board, ignition sequence, and venting. If we find something that’s a safety risk or a “repair now or replace soon” situation, we’ll show you exactly why. Sometimes, if the fix isn’t worth it, HVAC Furnace Installation & Replacement is the smarter move. Regular Furnace Maintenance & Tune-Up helps avoid most of these headaches.

Get all the details on HVAC Furnace Repair & Service.

HVAC Furnace Installation & Replacement

When your old furnace keeps breaking down or your gas bills keep climbing, replacement is usually the best call.

We see plenty of Fraser Valley homes running 20+ year-old furnaces, noisy, inefficient, or constantly in need of service. Warning signs include uneven heat between rooms, repeated ignition failures, or visible rust on the unit.

What’s involved in a quality install:

Proper furnace sizing based on square footage and insulation
Professional removal and disposal of the old unit
Upgrading venting and gas lines as needed
Walkthrough on filter changes and thermostat setup

A lot of homeowners come to us after repeated HVAC Furnace Repair & Service calls that just don’t stick. Once installed, a new unit paired with scheduled Furnace Maintenance & Tune-Up delivers years of reliable, quiet heat.

See what goes into a professional HVAC Furnace Installation & Replacement.

HVAC Furnace Maintenance & Tune-Up

Most furnace failures are preventable with a real tune-up, don’t wait for a cold snap to find out something’s wrong.

Common calls include noisy blowers, strange odours, or that dreaded “click, click, nothing” at startup. We find dirty burners, worn belts, and flame sensors caked with soot, especially after a long humid season or months of inactivity.

What we cover in a tune-up:

Cleaning burners and flame sensors
Inspecting the heat exchanger for cracks or rust
Checking blower operation and lubricating as needed
Testing all safety controls and limit switches
Gas pressure and carbon monoxide checks

Catching a $100 problem here can save you a $2,000 repair later. This is the best way to avoid emergency HVAC Furnace Repair & Service. Schedule AC Maintenance & Tune-Up at the same time for full-system reliability.

See what’s involved in HVAC Furnace Maintenance & Tune-Up.

HVAC Heat Pump Repair & Service

Heat pumps are popular in Fraser Valley homes for a reason, but when they fail, comfort disappears fast.

Most repair calls are for units stuck in heating or cooling mode, outdoor units icing up, or systems making loud rattling or buzzing. Common causes include low refrigerant, failed reversing valves, bad defrost boards, or airflow blockages from pollen and dust.

Heat pump problem checklist:

System won’t switch modes or maintain set temperature
Ice build-up on the outdoor unit
Odd noises or vibrations
Error codes on thermostat or control board

Our full diagnostic checks refrigerant pressures, temperature splits, defrost function, and electrical controls. If the unit’s nearing end-of-life, we’ll walk you through HVAC Heat Pump Installation & Replacement options. Regular HVAC Heat Pump Maintenance & Tune-Up prevents most failures.

For more on HVAC Heat Pump Repair & Service.

HVAC Heat Pump Installation & Replacement

Upgrading to a heat pump means year-round comfort and lower running costs, if you get the install right.

We see a lot of Fraser Valley homes needing to replace old, noisy, or underpowered systems. Some switch from baseboard heat or add cooling for the first time. Warning signs include rising electric bills, slow room recovery, or units that never seem to shut off.

Installation essentials:

Load calculation and proper sizing for both heating and cooling
Ductwork assessment or planning for ductless setups
Electrical upgrades and safe refrigerant line installation
Commissioning and user training

We often get calls from people who tried to save on install, only to need repeated HVAC Heat Pump Repair & Service within a year. Once installed, protect your new investment with annual HVAC Heat Pump Maintenance & Tune-Up.

Ready for a high-efficiency upgrade? See our approach to HVAC Heat Pump Installation & Replacement.

HVAC Heat Pump Maintenance & Tune-Up

Don’t let Fraser Valley’s dust, pollen, and humidity wreck your heat pump, maintenance keeps it efficient and reliable.

We get called when systems ice up, blow lukewarm air, or make odd squeals and rattles. Most issues come from neglected coils, plugged filters, or small refrigerant leaks that get worse over time.

Maintenance musts:

Coil and filter cleaning
Defrost cycle and sensor checks
Electrical and capacitor testing
Refrigerant pressure and leak checks

Skipping tune-ups shortens equipment life and leads to expensive HVAC Heat Pump Repair & Service. Keep things running smoothly by pairing this with AC Maintenance & Tune-Up for full comfort coverage.

See the details of HVAC Heat Pump Maintenance & Tune-Up.

HVAC Mini Split Repair & Service

Mini splits are great, until the wall unit starts dripping, buzzing, or ignores every command from the remote.

Most mini split failures we see are fan motor breakdowns, control board errors, clogged drains, or refrigerant issues, especially after heavy pollen or a wet season. Homeowners usually notice weak airflow, water leaks, or error lights on the indoor head.

Mini split repair focus:

Indoor and outdoor unit diagnostics
Checking for sensor, board, or communication faults
Drain and filter inspection for clogs or mold
Refrigerant and electrical system checks

Some fixes are quick, like cleaning a drain; others need deeper work or even HVAC Mini Split Installation & Replacement. Routine HVAC Mini Split Maintenance & Tune-Up can prevent most common problems.

Find out more about HVAC Mini Split Repair & Service.

HVAC Mini Split Installation & Replacement

Upgrading or adding a mini split? We handle everything from heritage homes to new builds across Fraser Valley.

Mini splits are often the best option for additions, suites, or rooms where ductwork just isn’t practical. We see a lot of installs in homes where comfort is a challenge, or the old system can’t keep up. Choosing the right size and layout makes all the difference.

What we do:

Assess room-by-room needs and best mounting options
Plan line sets and electrical connections for each zone
Handle safe removal and disposal if upgrading
Walk you through controls and filter maintenance

We’re often called after a failed DIY install or recurring HVAC Mini Split Repair & Service visits that don’t solve the root problem. Once installed, keep the system running with regular HVAC Mini Split Maintenance & Tune-Up.

See what goes into a quality HVAC Mini Split Installation & Replacement.

HVAC Mini Split Maintenance & Tune-Up

Your mini split works best when it’s clean and checked, especially with all the pollen and dust we get here.

We get service calls for units dripping, making more noise than usual, or losing cooling power. Most of the time, it’s a dirty filter or coil, with neglected drains letting water back up.

Maintenance checklist:

Clean or replace filters
Flush and clear drain lines
Inspect coils for dirt and dust buildup
Check refrigerant charge and system pressures
Verify controls and sensors are responsive

A quick tune-up now can save you a call for HVAC Mini Split Repair & Service down the road. We recommend syncing this with any scheduled HVAC AC Maintenance & Tune-Up for all-around reliability.

Learn more about HVAC Mini Split Maintenance & Tune-Up.

HVAC Boiler Repair & Service

Hot water heat is common in Fraser Valley homes, and when boilers act up, you notice fast.

The most common calls are for cold radiators, pressure dropping out, leaks, or gurgling pipes. We usually find failed pumps, leaking expansion tanks, stuck zone valves, or ignition issues. Older systems are especially prone to corrosion and scale.

Boiler repair focus:

System pressure and expansion tank checks
Pump, valve, and control board diagnostics
Leak detection and burner inspection
Safety controls and error code review

If the repair is minor, we get you back up and running; if we see signs that you’re due for HVAC Boiler Installation & Replacement, we’ll tell you straight. Regular HVAC Boiler Maintenance & Tune-Up extends system life and avoids big surprises.

For more on HVAC Boiler Repair & Service.

HVAC Boiler Installation & Replacement

Leaking, noisy, or ancient boiler? Replacement is often the only practical fix.

We see lots of Fraser Valley homes with aging cast iron boilers, outdated controls, or units that just guzzle energy. If your system can’t keep up, runs erratically, or is showing signs of rust and leaks, it’s usually smarter to invest in a new one.

What’s included:

Safe removal and disposal of the old boiler
Heat loss calculation and proper new sizing
System flushing, venting, and control upgrades
Full walkthrough on operation and maintenance

Many customers come to us after years of HVAC Boiler Repair & Service piling up. Once installed, keep your new boiler running right with annual HVAC Boiler Maintenance & Tune-Up.

See our approach to HVAC Boiler Installation & Replacement.

HVAC Boiler Maintenance & Tune-Up

Don’t let an ignored boiler turn into a flood or cold radiators when you need heat most.

We’re often called for kettling noises, low pressure, or cold spots in the system. Scale buildup, expansion tank failures, and air in the lines are all common culprits, especially with Fraser Valley’s water quality.

Tune-up essentials:

Bleed radiators and check for air locks
Inspect for scale, corrosion, and leaks
Test all safety controls and pressure relief valves
Clean burners and combustion chamber

Regular maintenance is the single best way to avoid emergency HVAC Boiler Repair & Service. Sync this with annual HVAC Furnace Maintenance & Tune-Up for a full heating system check.

Learn about HVAC Boiler Maintenance & Tune-Up.

How We Work

At Rep-Air Heating and Cooling, every home gets a real technician, not a commissioned salesperson, who listens to your concerns and starts with a proper diagnosis. We show up on time, talk through what you’re experiencing, and get hands-on with your equipment, whether it’s a furnace, AC, heat pump, boiler, or mini split.

Our process is transparent: we point out what’s urgent, what can wait, and what the real options are. If a repair is cost-effective, we handle it on the spot. If replacement is smarter, we’ll explain why, no scare tactics or high-pressure sales. We back our work with licensed trade expertise and certifications from Technical Safety BC, FortisBC, and CleanBC. You get safe, efficient results done right the first time.

Related Services

HVAC issues often overlap with problems in air quality, plumbing, or electrical systems.

Upgrading to a new heat pump or furnace? Don’t get caught with undersized wiring, our Whole-Home Protection services keep your system safe and reliable.

Get Home Comfort Back, Contact Us

If your heating or cooling is failing, bills are rising, or comfort just isn’t where it should be, don’t wait for things to get worse. Let us take the guesswork and stress off your plate.

Reach out to Rep-Air Heating and Cooling today to schedule a visit and get your home back to comfortable, efficient, and safe.

HVAC Services